Configuration

This chapter describes all configuration options in config.yaml. You can download a reference file with all configuration properties as JSON.

reference configuration file

upstreams:
  init:
    # Configure startup behavior.
    # accepted: blocking, failOnError, fast
    # default: blocking
    strategy: fast
  groups:
    # these external DNS resolvers will be used. Blocky picks 2 random resolvers from the list for each query
    # format for resolver: [net:]host:[port][/path]. net could be empty (default, shortcut for tcp+udp), tcp+udp, tcp, udp, tcp-tls or https (DoH). If port is empty, default port will be used (53 for udp and tcp, 853 for tcp-tls, 443 for https (Doh))
    # this configuration is mandatory, please define at least one external DNS resolver
    default:
      # example for tcp+udp IPv4 server (https://digitalcourage.de/)
      - 5.9.164.112
      # Cloudflare
      - 1.1.1.1
      # example for DNS-over-TLS server (DoT)
      - tcp-tls:fdns1.dismail.de:853
      # example for DNS-over-HTTPS (DoH)
      - https://dns.digitale-gesellschaft.ch/dns-query
    # optional: use client name (with wildcard support: * - sequence of any characters, [0-9] - range)
    # or single ip address / client subnet as CIDR notation
    laptop*:
      - 123.123.123.123
  # optional: Determines what strategy blocky uses to choose the upstream servers.
  # accepted: parallel_best, strict, random
  # default: parallel_best
  strategy: parallel_best
  # optional: timeout to query the upstream resolver. Default: 2s
  timeout: 2s
  # optional: HTTP User Agent when connecting to upstreams. Default: none
  userAgent: "custom UA"

# optional: Determines how blocky will create outgoing connections. This impacts both upstreams, and lists.
# accepted: dual, v4, v6
# default: dual
connectIPVersion: dual

# optional: custom IP address(es) for domain name (with all sub-domains). Multiple addresses must be separated by a comma
# example: query "printer.lan" or "my.printer.lan" will return 192.168.178.3
customDNS:
  customTTL: 1h
  # optional: if true (default), return empty result for unmapped query types (for example TXT, MX or AAAA if only IPv4 address is defined).
  # if false, queries with unmapped types will be forwarded to the upstream resolver
  filterUnmappedTypes: true
  # optional: replace domain in the query with other domain before resolver lookup in the mapping
  rewrite:
    example.com: printer.lan
  mapping:
    printer.lan: 192.168.178.3,2001:0db8:85a3:08d3:1319:8a2e:0370:7344

# optional: definition, which DNS resolver(s) should be used for queries to the domain (with all sub-domains). Multiple resolvers must be separated by a comma
# Example: Query client.fritz.box will ask DNS server 192.168.178.1. This is necessary for local network, to resolve clients by host name
conditional:
  # optional: if false (default), return empty result if after rewrite, the mapped resolver returned an empty answer. If true, the original query will be sent to the upstream resolver
  # Example: The query "blog.example.com" will be rewritten to "blog.fritz.box" and also redirected to the resolver at 192.168.178.1. If not found and if `fallbackUpstream` was set to `true`, the original query "blog.example.com" will be sent upstream.
  # Usage: One usecase when having split DNS for internal and external (internet facing) users, but not all subdomains are listed in the internal domain.
  fallbackUpstream: false
  # optional: replace domain in the query with other domain before resolver lookup in the mapping
  rewrite:
    example.com: fritz.box
  mapping:
    fritz.box: 192.168.178.1
    lan.net: 192.168.178.1,192.168.178.2

# optional: use black and white lists to block queries (for example ads, trackers, adult pages etc.)
blocking:
  # definition of blacklist groups. Can be external link (http/https) or local file
  blackLists:
    ads:
      - https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt
      - https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts
      - http://sysctl.org/cameleon/hosts
      - https://s3.amazonaws.com/lists.disconnect.me/simple_tracking.txt
      - |
        # inline definition with YAML literal block scalar style
        someadsdomain.com
        *.example.com
    special:
      - https://raw.githubusercontent.com/StevenBlack/hosts/master/alternates/fakenews/hosts
  # definition of whitelist groups. Attention: if the same group has black and whitelists, whitelists will be used to disable particular blacklist entries. If a group has only whitelist entries -> this means only domains from this list are allowed, all other domains will be blocked
  whiteLists:
    ads:
      - whitelist.txt
      - |
        # inline definition with YAML literal block scalar style
        # hosts format
        whitelistdomain.com
        # this is a regex
        /^banners?[_.-]/
  # definition: which groups should be applied for which client
  clientGroupsBlock:
    # default will be used, if no special definition for a client name exists
    default:
      - ads
      - special
    # use client name (with wildcard support: * - sequence of any characters, [0-9] - range)
    # or single ip address / client subnet as CIDR notation
    laptop*:
      - ads
    192.168.178.1/24:
      - special
  # which response will be sent, if query is blocked:
  # zeroIp: 0.0.0.0 will be returned (default)
  # nxDomain: return NXDOMAIN as return code
  # comma separated list of destination IP addresses (for example: 192.100.100.15, 2001:0db8:85a3:08d3:1319:8a2e:0370:7344). Should contain ipv4 and ipv6 to cover all query types. Useful with running web server on this address to display the "blocked" page.
  blockType: zeroIp
  # optional: TTL for answers to blocked domains
  # default: 6h
  blockTTL: 1m
  # optional: Configure how lists, AKA sources, are loaded
  loading:
    # optional: list refresh period in duration format.
    # Set to a value <= 0 to disable.
    # default: 4h
    refreshPeriod: 24h
    # optional: Applies only to lists that are downloaded (HTTP URLs).
    downloads:
      # optional: timeout for list download (each url). Use large values for big lists or slow internet connections
      # default: 5s
      timeout: 60s
      # optional: Maximum download attempts
      # default: 3
      attempts: 5
      # optional: Time between the download attempts
      # default: 500ms
      cooldown: 10s
    # optional: Maximum number of lists to process in parallel.
    # default: 4
    concurrency: 16
    # Configure startup behavior.
    # accepted: blocking, failOnError, fast
    # default: blocking
    strategy: failOnError
    # Number of errors allowed in a list before it is considered invalid.
    # A value of -1 disables the limit.
    # default: 5
    maxErrorsPerSource: 5

# optional: configuration for caching of DNS responses
caching:
  # duration how long a response must be cached (min value).
  # If <=0, use response's TTL, if >0 use this value, if TTL is smaller
  # Default: 0
  minTime: 5m
  # duration how long a response must be cached (max value).
  # If <0, do not cache responses
  # If 0, use TTL
  # If > 0, use this value, if TTL is greater
  # Default: 0
  maxTime: 30m
  # Max number of cache entries (responses) to be kept in cache (soft limit). Useful on systems with limited amount of RAM.
  # Default (0): unlimited
  maxItemsCount: 0
  # if true, will preload DNS results for often used queries (default: names queried more than 5 times in a 2-hour time window)
  # this improves the response time for often used queries, but significantly increases external traffic
  # default: false
  prefetching: true
  # prefetch track time window (in duration format)
  # default: 120
  prefetchExpires: 2h
  # name queries threshold for prefetch
  # default: 5
  prefetchThreshold: 5
  # Max number of domains to be kept in cache for prefetching (soft limit). Useful on systems with limited amount of RAM.
  # Default (0): unlimited
  prefetchMaxItemsCount: 0
  # Time how long negative results (NXDOMAIN response or empty result) are cached. A value of -1 will disable caching for negative results.
  # Default: 30m
  cacheTimeNegative: 30m

# optional: configuration of client name resolution
clientLookup:
  # optional: this DNS resolver will be used to perform reverse DNS lookup (typically local router)
  upstream: 192.168.178.1
  # optional: some routers return multiple names for client (host name and user defined name). Define which single name should be used.
  # Example: take second name if present, if not take first name
  singleNameOrder:
    - 2
    - 1
  # optional: custom mapping of client name to IP addresses. Useful if reverse DNS does not work properly or just to have custom client names.
  clients:
    laptop:
      - 192.168.178.29

# optional: configuration for prometheus metrics endpoint
prometheus:
  # enabled if true
  enable: true
  # url path, optional (default '/metrics')
  path: /metrics

# optional: write query information (question, answer, client, duration etc.) to daily csv file
queryLog:
  # optional one of: mysql, postgresql, csv, csv-client. If empty, log to console
  type: mysql
  # directory (should be mounted as volume in docker) for csv, db connection string for mysql/postgresql
  target: db_user:db_password@tcp(db_host_or_ip:3306)/db_name?charset=utf8mb4&parseTime=True&loc=Local
  #postgresql target: postgres://user:password@db_host_or_ip:5432/db_name
  # if > 0, deletes log files which are older than ... days
  logRetentionDays: 7
  # optional: Max attempts to create specific query log writer, default: 3
  creationAttempts: 1
  # optional: Time between the creation attempts, default: 2s
  creationCooldown: 2s
  # optional: Which fields should be logged. You can choose one or more from: clientIP, clientName, responseReason, responseAnswer, question, duration. If not defined, it logs all fields
  fields:
    - clientIP
    - duration
  # optional: Interval to write data in bulk to the external database, default: 30s
  flushInterval: 30s

# optional: Blocky can synchronize its cache and blocking state between multiple instances through redis.
redis:
  # Server address and port or master name if sentinel is used
  address: redismaster
  # Username if necessary
  username: usrname
  # Password if necessary
  password: passwd
  # Database, default: 0
  database: 2
  # Connection is required for blocky to start. Default: false
  required: true
  # Max connection attempts, default: 3
  connectionAttempts: 10
  # Time between the connection attempts, default: 1s
  connectionCooldown: 3s
  # Sentinal username if necessary
  sentinelUsername: usrname
  # Sentinal password if necessary
  sentinelPassword: passwd
  # List with address and port of sentinel hosts(sentinel is activated if at least one sentinel address is configured)
  sentinelAddresses:
    - redis-sentinel1:26379
    - redis-sentinel2:26379
    - redis-sentinel3:26379

# optional: Mininal TLS version that the DoH and DoT server will use
minTlsServeVersion: 1.3

# if https port > 0: path to cert and key file for SSL encryption. if not set, self-signed certificate will be generated
#certFile: server.crt
#keyFile: server.key

# optional: use these DNS servers to resolve blacklist urls and upstream DNS servers. It is useful if no system DNS resolver is configured, and/or to encrypt the bootstrap queries.
bootstrapDns:
  - tcp+udp:1.1.1.1
  - https://1.1.1.1/dns-query
  - upstream: https://dns.digitale-gesellschaft.ch/dns-query
    ips:
      - 185.95.218.42

# optional: drop all queries with following query types. Default: empty
filtering:
  queryTypes:
    - AAAA

# optional: return NXDOMAIN for queries that are not FQDNs.
fqdnOnly:
  # default: false
  enable: true

# optional: if path defined, use this file for query resolution (A, AAAA and rDNS). Default: empty
hostsFile:
  # optional: Hosts files to parse
  sources:
    - /etc/hosts
    - https://example.com/hosts
    - |
      # inline hosts
      127.0.0.1 example.com
  # optional: TTL, default: 1h
  hostsTTL: 30m
  # optional: Whether loopback hosts addresses (127.0.0.0/8 and ::1) should be filtered or not
  # default: false
  filterLoopback: true
  # optional: Configure how sources are loaded
  loading:
    # optional: file refresh period in duration format.
    # Set to a value <= 0 to disable.
    # default: 4h
    refreshPeriod: 24h
    # optional: Applies only to files that are downloaded (HTTP URLs).
    downloads:
      # optional: timeout for file download (each url). Use large values for big files or slow internet connections
      # default: 5s
      timeout: 60s
      # optional: Maximum download attempts
      # default: 3
      attempts: 5
      # optional: Time between the download attempts
      # default: 500ms
      cooldown: 10s
    # optional: Maximum number of files to process in parallel.
    # default: 4
    concurrency: 16
    # Configure startup behavior.
    # accepted: blocking, failOnError, fast
    # default: blocking
    strategy: failOnError
    # Number of errors allowed in a file before it is considered invalid.
    # A value of -1 disables the limit.
    # default: 5
    maxErrorsPerSource: 5

# optional: ports configuration
ports:
  # optional: DNS listener port(s) and bind ip address(es), default 53 (UDP and TCP). Example: 53, :53, "127.0.0.1:5353,[::1]:5353"
  dns: 53
  # optional: Port(s) and bind ip address(es) for DoT (DNS-over-TLS) listener. Example: 853, 127.0.0.1:853
  tls: 853
  # optional: Port(s) and optional bind ip address(es) to serve HTTPS used for prometheus metrics, pprof, REST API, DoH... If you wish to specify a specific IP, you can do so such as 192.168.0.1:443. Example: 443, :443, 127.0.0.1:443,[::1]:443
  https: 443
  # optional: Port(s) and optional bind ip address(es) to serve HTTP used for prometheus metrics, pprof, REST API, DoH... If you wish to specify a specific IP, you can do so such as 192.168.0.1:4000. Example: 4000, :4000, 127.0.0.1:4000,[::1]:4000
  http: 4000

# optional: logging configuration
log:
  # optional: Log level (one from debug, info, warn, error). Default: info
  level: info
  # optional: Log format (text or json). Default: text
  format: text
  # optional: log timestamps. Default: true
  timestamp: true
  # optional: obfuscate log output (replace all alphanumeric characters with *) for user sensitive data like request domains or responses to increase privacy. Default: false
  privacy: false

# optional: add EDE error codes to dns response
ede:
  # enabled if true, Default: false
  enable: true

# optional: configure optional Special Use Domain Names (SUDN)
specialUseDomains:
  # optional: block recomended private TLDs
  # default: true
  rfc6762-appendixG: true

# optional: configure extended client subnet (ECS) support
ecs:
  # optional: if the request ecs option with a max sice mask the address will be used as client ip
  useAsClient: true
  # optional: if the request contains a ecs option it will be forwarded to the upstream resolver
  forward: true

Basic configuration

Parameter	Type	Mandatory	Default value	Description
certFile	path	no		Path to cert and key file for SSL encryption (DoH and DoT); if empty, self-signed certificate is generated
keyFile	path	no		Path to cert and key file for SSL encryption (DoH and DoT); if empty, self-signed certificate is generated
minTlsServeVersion	string	no	1.2	Minimum TLS version that the DoT and DoH server use to serve those encrypted DNS requests
connectIPVersion	enum (dual, v4, v6)	no	dual	IP version to use for outgoing connections (dual, v4, v6)

Example

minTlsServeVersion: 1.1
connectIPVersion: v4

Ports configuration

All logging port are optional.

Parameter	Type	Default value	Description
ports.dns	[IP]:port[,[IP]:port]*	53	Port(s) and optional bind ip address(es) to serve DNS endpoint (TCP and UDP). If you wish to specify a specific IP, you can do so such as 192.168.0.1:53. Example: 53, :53, 127.0.0.1:53,[::1]:53
ports.tls	[IP]:port[,[IP]:port]*		Port(s) and optional bind ip address(es) to serve DoT DNS endpoint (DNS-over-TLS). If you wish to specify a specific IP, you can do so such as 192.168.0.1:853. Example: 83, :853, 127.0.0.1:853,[::1]:853
ports.http	[IP]:port[,[IP]:port]*		Port(s) and optional bind ip address(es) to serve HTTP used for prometheus metrics, pprof, REST API, DoH... If you wish to specify a specific IP, you can do so such as 192.168.0.1:4000. Example: 4000, :4000, 127.0.0.1:4000,[::1]:4000
ports.https	[IP]:port[,[IP]:port]*		Port(s) and optional bind ip address(es) to serve HTTPS used for prometheus metrics, pprof, REST API, DoH... If you wish to specify a specific IP, you can do so such as 192.168.0.1:443. Example: 443, :443, 127.0.0.1:443,[::1]:443

Example

ports:
  dns: 53
  http: 4000
  https: 443

Logging configuration

All logging options are optional.

Parameter	Type	Default value	Description
log.level	enum (debug, info, warn, error)	info	Log level
log.format	enum (text, json)	text	Log format (text or json).
log.timestamp	bool	true	Log time stamps (true or false).
log.privacy	bool	false	Obfuscate log output (replace all alphanumeric characters with *) for user sensitive data like request domains or responses to increase privacy.

Example

log:
  level: debug
  format: json
  timestamp: false
  privacy: true

Init Strategy

A couple of features use an "init/loading strategy" which configures behavior at Blocky startup.
This applies to all of them. The default strategy is blocking.

strategy	Description
blocking	Initialization happens before DNS resolution starts. Any errors are logged, but Blocky continues running if possible.
failOnError	Like blocking but Blocky will exit with an error if initialization fails.
fast	Blocky starts serving DNS immediately and initialization happens in the background. The feature requiring initialization will enable later on (if it succeeds).

Upstreams configuration

Parameter	Type	Mandatory	Default value	Description
usptreams.groups	map of name to upstream	yes		Upstream DNS servers to use, in groups.
usptreams.init.strategy	enum (blocking, failOnError, fast)	no	blocking	See Init Strategy and below.
usptreams.strategy	enum (parallel_best, random, strict)	no	parallel_best	Upstream server usage strategy.
usptreams.timeout	duration	no	2s	Upstream connection timeout.
usptreams.userAgent	string	no		HTTP User Agent when connecting to upstreams.

For init.strategy, the "init" is testing the given resolvers for each group. The potentially fatal error, depending on the strategy, is if a group has no functional resolvers.

Upstream Groups

To resolve a DNS query, blocky needs external public or private DNS resolvers. Blocky supports DNS resolvers with following network protocols (net part of the resolver URL):

• tcp+udp (UDP and TCP, dependent on query type)
• https (aka DoH)
• tcp-tls (aka DoT)

Hint

You can (and should!) configure multiple DNS resolvers.
Per default blocky uses the parallel_best upstream strategy where blocky picks 2 random resolvers from the list for each query and returns the answer from the fastest one.

Each resolver must be defined as a string in following format: [net:]host:[port][/path][#commonName].

Parameter	Type	Mandatory	Default value
net	enum (tcp+udp, tcp-tls or https)	no	tcp+udp
host	IP or hostname	yes
port	int (1 - 65535)	no	53 for udp/tcp, 853 for tcp-tls and 443 for https
commonName	string	no	the host value

The commonName parameter overrides the expected certificate common name value used for verification.

Note

Blocky needs at least the configuration of the default group with at least one upstream DNS server. This group will be used as a fallback, if no client specific resolver configuration is available.

See List of public DNS servers if you need some ideas, which public free DNS server you could use.

You can specify multiple upstream groups (additional to the default group) to use different upstream servers for different clients, based on client name (see Client name lookup), client IP address or client subnet (as CIDR).

Tip

You can use * as wildcard for the sequence of any character or [0-9] as number range

Example

upstreams:
  groups:
    default:
      - 5.9.164.112
      - 1.1.1.1
      - tcp-tls:fdns1.dismail.de:853
      - https://dns.digitale-gesellschaft.ch/dns-query
    laptop*:
      - 123.123.123.123
    10.43.8.67/28:
      - 1.1.1.1
      - 9.9.9.9

The above example results in:

• 123.123.123.123 as the only upstream DNS resolver for clients with a name starting with "laptop"
• 1.1.1.1 and 9.9.9.9 for all clients in the subnet 10.43.8.67/28
• 4 resolvers (default) for all others clients.

The logic determining what group a client belongs to follows a strict order: IP, client name, CIDR

If a client matches multiple client name or CIDR groups, a warning is logged and the first found group is used.

Upstream connection timeout

Blocky will wait 2 seconds (default value) for the response from the external upstream DNS server. You can change this value by setting the timeout configuration parameter (in duration format).

Example

upstreams:
  timeout: 5s
  groups:
    default:
      - 46.182.19.48
      - 80.241.218.68

Upstream strategy

Blocky supports different upstream strategies (default parallel_best) that determine how and to which upstream DNS servers requests are forwarded.

Currently available strategies:

• parallel_best: blocky picks 2 random (weighted) resolvers from the upstream group for each query and returns the answer from the fastest one.
  If an upstream failed to answer within the last hour, it is less likely to be chosen for the race.
  This improves your network speed and increases your privacy - your DNS traffic will be distributed over multiple providers.
  (When using 10 upstream servers, each upstream will get on average 20% of the DNS requests)
• random: blocky picks one random (weighted) resolver from the upstream group for each query and if successful, returns its response.
  If the selected resolver fails to respond, a second one is picked to which the query is sent.
  The weighting is identical to the parallel_best strategy.
  Although the random strategy might be slower than the parallel_best strategy, it offers more privacy since each request is sent to a single upstream.
• strict: blocky forwards the request in a strict order. If the first upstream does not respond, the second is asked, and so on.

Example

upstreams:
  strategy: strict
  groups:
    default:
      - 1.2.3.4
      - 9.8.7.6

Bootstrap DNS configuration

These DNS servers are used to resolve upstream DoH and DoT servers that are specified as host names, and list domains. It is useful if no system DNS resolver is configured, and/or to encrypt the bootstrap queries.

Parameter	Type	Mandatory	Default value	Description
upstream	Upstream (see above)	no
ips	List of IPs	yes, if upstream is DoT/DoH		Only valid if upstream is DoH or DoT

When using an upstream specified by IP, and not by hostname, you can write only the upstream and skip ips.

Note

Works only on Linux/*nix OS due to golang limitations under Windows.

Example

    bootstrapDns:
      - upstream: tcp-tls:dns.example.com
        ips:
        - 123.123.123.123
      - upstream: https://234.234.234.234/dns-query

Filtering

Under certain circumstances, it may be useful to filter some types of DNS queries. You can define one or more DNS query types, all queries with these types will be dropped (empty answer will be returned).

Example

filtering:
  queryTypes:
    - AAAA

This configuration will drop all 'AAAA' (IPv6) queries.

FQDN only

In domain environments, it may be useful to only response to FQDN requests. If this option is enabled blocky respond immediately with NXDOMAIN if the request is not a valid FQDN. The request is therefore not further processed by other options like custom or conditional. Please be aware that by enabling it your hostname resolution will break unless every hostname is part of a domain.

Example

fqdnOnly:
  enable: true

Custom DNS

You can define your own domain name to IP mappings. For example, you can use a user-friendly name for a network printer or define a domain name for your local device on order to use the HTTPS certificate. Multiple IP addresses for one domain must be separated by a comma.

Parameter	Type	Mandatory	Default value
customTTL	duration (no unit is minutes)	no	1h
rewrite	string: string (domain: domain)	no
mapping	string: string (hostname: address list)	no
filterUnmappedTypes	boolean	no	true

Example

customDNS:
  customTTL: 1h
  filterUnmappedTypes: true
  rewrite:
    home: lan
    replace-me.com: with-this.com
  mapping:
    printer.lan: 192.168.178.3
    otherdevice.lan: 192.168.178.15,2001:0db8:85a3:08d3:1319:8a2e:0370:7344

This configuration will also resolve any subdomain of the defined domain, recursively. For example querying any of printer.lan, my.printer.lan or i.love.my.printer.lan will return 192.168.178.3.

With the optional parameter rewrite you can replace domain part of the query with the defined part before the resolver lookup is performed. The query "printer.home" will be rewritten to "printer.lan" and return 192.168.178.3.

With parameter filterUnmappedTypes = true (default), blocky will filter all queries with unmapped types, for example: AAAA for "printer.lan" or TXT for "otherdevice.lan". With filterUnmappedTypes = false a query AAAA "printer.lan" will be forwarded to the upstream DNS server.

Conditional DNS resolution

You can define, which DNS resolver(s) should be used for queries for the particular domain (with all subdomains). This is for example useful, if you want to reach devices in your local network by the name. Since only your router know which hostname belongs to which IP address, all DNS queries for the local network should be redirected to the router.

The optional parameter rewrite behaves the same as with custom DNS.

The optional parameter fallbackUpstream, if false (default), return empty result if after rewrite, the mapped resolver returned an empty answer. If true, the original query will be sent to the upstream resolver.

Usage: One usecase when having split DNS for internal and external (internet facing) users, but not all subdomains are listed in the internal domain

Example

conditional:
  fallbackUpstream: false
  rewrite:
    example.com: fritz.box
    replace-me.com: with-this.com
  mapping:
    fritz.box: 192.168.178.1
    lan.net: 192.170.1.2,192.170.1.3
    # for reverse DNS lookups of local devices
    178.168.192.in-addr.arpa: 192.168.178.1
    # for all unqualified hostnames
    .: 168.168.0.1

Tip

You can use . as wildcard for all non full qualified domains (domains without dot)

In this example, a DNS query "client.fritz.box" will be redirected to the router's DNS server at 192.168.178.1 and client.lan.net to 192.170.1.2 and 192.170.1.3. The query "client.example.com" will be rewritten to "client.fritz.box" and also redirected to the resolver at 192.168.178.1.

If not found and if fallbackUpstream was set to true, the original query "blog.example.com" will be sent upstream.

All unqualified host names (e.g. "test") will be redirected to the DNS server at 168.168.0.1.

One usecase for fallbackUpstream is when having split DNS for internal and external (internet facing) users, but not all subdomains are listed in the internal domain.

Client name lookup

Blocky can try to resolve a user-friendly client name from the IP address or server URL (DoT and DoH). This is useful for defining of blocking groups, since IP address can change dynamically.

Resolving client name from URL/Host

If DoT or DoH is enabled, you can use a subdomain prefixed with id- to provide a client name (wildcard ssl certificate recommended).

Example: domain example.com

DoT Host: id-bob.example.com -> request's client name is bob DoH URL: https://id-bob.example.com/dns-query -> request's client name is bob

For DoH you can also pass the client name as url parameter:

DoH URL: https://blocky.example.com/dns-query/alice -> request's client name is alice

Resolving client name from IP address

Blocky uses rDNS to retrieve client's name. To use this feature, you can configure a DNS server for client lookup ( typically your router). You can also define client names manually per IP address.

Single name order

Some routers return multiple names for the client (host name and user defined name). With parameter clientLookup.singleNameOrder you can specify, which of retrieved names should be used.

Custom client name mapping

You can also map a particular client name to one (or more) IP (ipv4/ipv6) addresses. Parameter clientLookup.clients contains a map of client name and multiple IP addresses.

Example

clientLookup:
  upstream: 192.168.178.1
  singleNameOrder:
    - 2
    - 1
  clients:
    laptop:
      - 192.168.178.29

Use 192.168.178.1 for rDNS lookup. Take second name if present, if not take first name. IP address 192.168.178.29 is mapped to laptop as client name.

Blocking and whitelisting

Blocky can use lists of domains and IPs to block (e.g. advertisement, malware, trackers, adult sites). You can group several list sources together and define the blocking behavior per client. Blocking uses the DNS sinkhole approach. For each DNS query, the domain name from the request, IP address from the response, and any CNAME records will be checked to determine whether to block the query or not.

To avoid over-blocking, you can use whitelists.

Definition black and whitelists

Lists are defined in groups. This allows using different sets of lists for different clients.

Each list in a group is a "source" and can be downloaded, read from a file, or inlined in the config. See Sources for details and configuring how those are loaded and reloaded/refreshed.

The supported list formats are:

1. the well-known Hosts format
2. one domain per line (plain domain list)
3. one wildcard per line
4. one regex per line

Example

blocking:
  blackLists:
    ads:
      - https://s3.amazonaws.com/lists.disconnect.me/simple_ad.txt
      - https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts
      - |
        # inline definition using YAML literal block scalar style
        # content is in plain domain list format
        someadsdomain.com
        anotheradsdomain.com
        *.wildcard.example.com # blocks wildcard.example.com and all subdomains
      - |
        # inline definition with a regex
        /^banners?[_.-]/
    special:
      - https://raw.githubusercontent.com/StevenBlack/hosts/master/alternates/fakenews/hosts
  whiteLists:
    ads:
      - whitelist.txt
      - /path/to/file.txt
      - |
        # inline definition with YAML literal block scalar style
        whitelistdomain.com

In this example you can see 2 groups: ads and special with one list. The ads group includes 2 inline lists.

Warning

If the same group has black and whitelists, whitelists will be used to disable particular blacklist entries. If a group has only whitelist entries -> this means only domains from this list are allowed, all other domains will be blocked.

Warning

You must also define client group mapping, otherwise you black and whitelist definition will have no effect.

Wildcard support

You can use wildcards to block a domain and all its subdomains. Example: *.example.com will block example.com and any.subdomains.example.com.

Regex support

You can use regex to define patterns to block. A regex entry must start and end with the slash character (/). Some Examples:

• /baddomain/ will block www.baddomain.com, baddomain.com, but also mybaddomain-sometext.com
• /^baddomain/ will block baddomain.com, but not www.baddomain.com
• /^apple\.(de|com)$/ will only block apple.de and apple.com

Warning

Regexes use more a lot more memory and are much slower than wildcards, you should use them as a last resort.

Client groups

In this configuration section, you can define, which blocking group(s) should be used for which client in your network. Example: All clients should use the ads group, which blocks advertisement and kids devices should use the adult group, which blocky adult sites.

Clients without an explicit group assignment will use the default group.

You can use the client name (see Client name lookup), client's IP address, client's full-qualified domain name or a client subnet as CIDR notation.

If full-qualified domain name is used (for example "myclient.ddns.org"), blocky will try to resolve the IP address (A and AAAA records) of this domain. If client's IP address matches with the result, the defined group will be used.

Example

blocking:
  clientGroupsBlock:
  # default will be used, if no special definition for a client name exists
    default:
      - ads
      - special
    laptop*:
      - ads
    192.168.178.1/24:
      - special
    kid-laptop:
      - ads
      - adult

All queries from network clients, whose device name starts with laptop, will be filtered against the ads group's lists. All devices from the subnet 192.168.178.1/24 against the special group and kid-laptop against ads and adult. All other clients: ads and special.

Tip

You can use * as wildcard for the sequence of any character or [0-9] as number range

Block type

You can configure, which response should be sent to the client, if a requested query is blocked (only for A and AAAA queries, NXDOMAIN for other types):

blockType	Example	Description
zeroIP	zeroIP	This is the default block type. Server returns 0.0.0.0 (or :: for IPv6) as result for A and AAAA queries
nxDomain	nxDomain	return NXDOMAIN as return code
custom IPs	192.100.100.15, 2001:0db8:85a3:08d3:1319:8a2e:0370:7344	comma separated list of destination IP addresses. Should contain ipv4 and ipv6 to cover all query types. Useful with running web server on this address to display the "blocked" page.

Example

blocking:
  blockType: nxDomain

Block TTL

TTL for answers to blocked domains can be set to customize the time (in duration format) clients ask for those domains again. Default Block TTL is 6hours. This setting only makes sense when blockType is set to nxDomain or zeroIP, and will affect how much time it could take for a client to be able to see the real IP address for a domain after receiving the custom value.

Example

blocking:
  blockType: 192.100.100.15, 2001:0db8:85a3:08d3:1319:8a2e:0370:7344
  blockTTL: 10s

Lists Loading

See Sources Loading.

Caching

Each DNS response has a TTL (Time-to-live) value. This value defines, how long is the record valid in seconds. The values are maintained by domain owners, server administrators etc. Blocky caches the answers from all resolved queries in own cache in order to avoid repeated requests. This reduces the DNS traffic and increases the network speed, since blocky can serve the result immediately from the cache.

With following parameters you can tune the caching behavior:

Warning

Wrong values can significantly increase external DNS traffic or memory consumption.

Parameter	Type	Mandatory	Default value	Description
caching.minTime	duration format	no	0 (use TTL)	How long a response must be cached (min value). If <=0, use response's TTL, if >0 use this value, if TTL is smaller
caching.maxTime	duration format	no	0 (use TTL)	How long a response must be cached (max value). If <0, do not cache responses. If 0, use TTL. If > 0, use this value, if TTL is greater
caching.maxItemsCount	int	no	0 (unlimited)	Max number of cache entries (responses) to be kept in cache (soft limit). Default (0): unlimited. Useful on systems with limited amount of RAM.
caching.prefetching	bool	no	false	if true, blocky will preload DNS results for often used queries (default: names queried more than 5 times in a 2 hour time window). Results in cache will be loaded again on their expire (TTL). This improves the response time for often used queries, but significantly increases external traffic. It is recommended to increase "minTime" to reduce the number of prefetch queries to external resolvers.
caching.prefetchExpires	duration format	no	2h	Prefetch track time window
caching.prefetchThreshold	int	no	5	Name queries threshold for prefetch
caching.prefetchMaxItemsCount	int	no	0 (unlimited)	Max number of domains to be kept in cache for prefetching (soft limit). Default (0): unlimited. Useful on systems with limited amount of RAM.
caching.cacheTimeNegative	duration format	no	30m	Time how long negative results (NXDOMAIN response or empty result) are cached. A value of -1 will disable caching for negative results.

Example

caching:
  minTime: 5m
  maxTime: 30m
  prefetching: true

Redis

Blocky can synchronize its cache and blocking state between multiple instances through redis. Synchronization is disabled if no address is configured.

Parameter	Type	Mandatory	Default value	Description
redis.address	string	no		Server address and port or master name if sentinel is used
redis.username	string	no		Username if necessary
redis.password	string	no		Password if necessary
redis.database	int	no	0	Database
redis.required	bool	no	false	Connection is required for blocky to start
redis.connectionAttempts	int	no	3	Max connection attempts
redis.connectionCooldown	duration format	no	1s	Time between the connection attempts
redis.sentinelUsername	string	no		Sentinel username if necessary
redis.sentinelPassword	string	no		Sentinel password if necessary
redis.sentinelAddresses	string[]	no		Sentinel host list (Sentinel is activated if addresses are defined)

Example

redis:
  address: redismaster
  username: usrname
  password: passwd
  database: 2
  required: true
  connectionAttempts: 10
  connectionCooldown: 3s
  sentinelUsername: sentUsrname
  sentinelPassword: sentPasswd
  sentinelAddresses:
    - redis-sentinel1:26379
    - redis-sentinel2:26379
    - redis-sentinel3:26379

Prometheus

Blocky can expose various metrics for prometheus. To use the prometheus feature, the HTTP listener must be enabled ( see Basic Configuration).

Parameter	Mandatory	Default value	Description
prometheus.enable	no	false	If true, enables prometheus metrics
prometheus.path	no	/metrics	URL path to the metrics endpoint

Example

prometheus:
  enable: true
  path: /metrics

Query logging

You can enable the logging of DNS queries (question, answer, client, duration etc.) to a daily CSV file (can be opened in Excel or OpenOffice Calc) or MySQL/MariaDB database.

Warning

Query file/database contains sensitive information. Please ensure to inform users, if you log their queries.

Query log types

You can select one of following query log types:

• mysql - log each query in the external MySQL/MariaDB database
• postgresql - log each query in the external PostgreSQL database
• csv - log into CSV file (one per day)
• csv-client - log into CSV file (one per day and per client)
• console - log into console output
• none - do not log any queries

Query log fields

You can choose which information from processed DNS request and response should be logged in the target system. You can define one or more of following fields:

• clientIP - origin IP address from the request
• clientName - resolved client name(s) from the origins request
• responseReason - reason for the response (e.g. from which upstream resolver), response type and code
• responseAnswer - returned DNS answer
• question - DNS question from the request
• duration - request processing time in milliseconds

Hint

If not defined, blocky will log all available information

Configuration parameters:

Parameter	Type	Mandatory	Default value	Description
queryLog.type	enum (mysql, postgresql, csv, csv-client, console, none (see above))	no		Type of logging target. Console if empty
queryLog.target	string	no		directory for writing the logs (for csv) or database url (for mysql or postgresql)
queryLog.logRetentionDays	int	no	0	if > 0, deletes log files/database entries which are older than ... days
queryLog.creationAttempts	int	no	3	Max attempts to create specific query log writer
queryLog.creationCooldown	duration format	no	2s	Time between the creation attempts
queryLog.fields	list enum (clientIP, clientName, responseReason, responseAnswer, question, duration)	no	all	which information should be logged
queryLog.flushInterval	duration format	no	30s	Interval to write data in bulk to the external database

Hint

Please ensure, that the log directory is writable or database exists. If you use docker, please ensure, that the directory is properly mounted (e.g. volume)

example for CSV format with limited logging information

Example

queryLog:
  type: csv
  target: /logs
  logRetentionDays: 7
  fields:
  - clientIP
  - duration
  flushInterval: 30s

example for Database

Example

queryLog:
  type: mysql
  target: db_user:db_password@tcp(db_host_or_ip:3306)/db_user?charset=utf8mb4&parseTime=True&loc=Local
  logRetentionDays: 7

Hosts file

You can enable resolving of entries, located in local hosts file.

Configuration parameters:

Parameter	Type	Mandatory	Default value	Description
hostsFile.sources	list of string	no		Host files (e.g. /etc/hosts on Linux)
hostsFile.hostsTTL	duration (no units is minutes)	no	1h	TTL
hostsFile.refreshPeriod	duration format	no	1h	Time between hosts file refresh
hostsFile.filterLoopback	bool	no	false	Filter loopback addresses (127.0.0.0/8 and ::1)
hostsFile.loading		no		See Sources Loading

Example

hostsFile:
  filePath: /etc/hosts
  hostsTTL: 1h
  refreshPeriod: 30m
  loading:
    strategy: fast

Deliver EDE codes as EDNS0 option

DNS responses can be extended with EDE codes according to RFC8914.

Configuration parameters:

Parameter	Type	Mandatory	Default value	Description
ede.enable	bool	no	false	If true, DNS responses are deliverd with EDE codes

Example

ede:
  enable: true

EDNS Client Subnet options

EDNS Client Subnet (ECS) configuration parameters:

Parameter	Type	Mandatory	Default value	Description
ecs.useAsClient	bool	no	false	Use ECS information if it is present with a netmask is 32 for IPv4 or 128 for IPv6 as CientIP
ecs.forward	bool	no	false	Forward ECS option to upstream
ecs.ipv4Mask	int	no	0	Add ECS option for IPv4 requests if mask is greater than zero (max value 32)
ecs.ipv6Mask	int	no	0	Add ECS option for IPv6 requests if mask is greater than zero (max value 128)

Example

ecs:
  ipv4Mask: 32
  ipv6Mask: 128

Special Use Domain Names

SUDN (Special Use Domain Names) are always enabled as they are required by various RFCs.
Some RFCs have optional recommendations, which are configurable as described below.

Configuration parameters:

Parameter	Type	Mandatory	Default value	Description
specialUseDomains.rfc6762-appendixG	bool	no	true	Block TLDs listed in RFC 6762 Appendix G

Example

specialUseDomains:
  rfc6762-appendixG: true

SSL certificate configuration (DoH / TLS listener)

See Wiki - Configuration of HTTPS for detailed information, how to create and configure SSL certificates.

DoH url: https://host:port/dns-query

Sources

Sources are a concept shared by the blocking and hosts file resolvers. They represent where to load the files for each resolver.

The supported source types are:

• HTTP(S) URL (any source starting with http)
• inline configuration (any source containing a newline)
• local file path (any source not matching the above rules)

Note

The format/content of the sources depends on the context: lists and hosts files have different, but overlapping, supported formats.

Example

- https://example.com/a/source # blocky will download and parse the file
- /a/file/path # blocky will read the local file
- | # blocky will parse the content of this multi-line string
  # inline configuration

Sources Loading

This sections covers loading configuration that applies to both the blocking and hosts file resolvers. These settings apply only to the resolver under which they are nested.

Example

blocking:
  loading:
    # only applies to white/blacklists

hostsFile:
  loading:
    # only applies to hostsFile sources

Refresh / Reload

To keep source contents up-to-date, blocky can periodically refresh and reparse them. Default period is ** 4 hours. You can configure this by setting the refreshPeriod parameter to a value in duration format**.
A value of zero or less will disable this feature.

Example

loading:
  refreshPeriod: 1h

Refresh every hour.

Downloads

Configures how HTTP(S) sources are downloaded:

Parameter	Type	Mandatory	Default value	Description
timeout	duration	no	5s	Download attempt timeout
attempts	int	no	3	How many download attempts should be performed
cooldown	duration	no	500ms	Time between the download attempts

Example

loading:
  downloads:
    timeout: 4m
    attempts: 5
    cooldown: 10s

Strategy

See Init Strategy.
In this context, "init" is loading and parsing each source, and an error is a single source failing to load/parse.

Example

loading:
  strategy: failOnError

Max Errors per Source

Number of errors allowed when parsing a source before it is considered invalid and parsing stops.
A value of -1 disables the limit.

Example

loading:
  maxErrorsPerSource: 10

Concurrency

Blocky downloads and processes sources concurrently. This allows limiting how many can be processed in the same time.
Larger values can reduce the overall list refresh time at the cost of using more RAM. Please consider reducing this value on systems with limited memory.
Default value is 4.

Example

loading:
  concurrency: 10

Note

As with other settings under loading, the limit applies to the blocking and hosts file resolvers separately. The total number of concurrent sources concurrently processed can reach the sum of both values.
For example if blocking has a limit set to 8 and hosts file's is 4, there could be up to 12 concurrent jobs.